EPS Foam was used to produce light weight rafts
6” x 48” x 96” EPS of a 1.35 lb density was used for these prototype light weight rafts produced in Hughson, CA 95236 . The 6” x 48” x 96” panels were coated with a polyuria coating and outfitted…
6” x 48” x 96” EPS of a 1.35 lb density was used for these prototype light weight rafts produced in Hughson, CA 95236 . The 6” x 48” x 96” panels were coated with a polyuria coating and outfitted…
Four Foam blocks of nominal 2 lb density virgin EPS 8” x 48” x 72” were used to create an outer shell for this CT Scan in South Florida. The foam was carved using a hot wire and hot knives…